| S.NO. | QUALITY DEPT. NO. | SPECIFICATION | STANDARD NO. |
|---|---|---|---|
| 1 | QIS-12 | SPECIFICATION FOR COLD ROLLED LOW CARBON STEEL SHEETS AND STRIPS (DWG. QUALITY) | IS : 513-1986 |
| 2 | QIS-15 | SPECIFICATION FOR ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS & SECTIONS FOR GENERAL ENGINEERING PURPOSE. (III REV) | IS : 733-1983 |
| 3 | QIS-1 | COLOURS FOR READY MIXED PAINTS AND ENAMELS (IV REV) | IS : 5-1994 RAL Standard BS 381 C/BS 4800 |
| 4 | QIS-3 | METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS | IS : 101-1964 |
| 5 | QIS-10 | SPECIFICATION FOR READY MIXED PAINTS, SPRAYING, FINISHING, STOVING, ENAMEL, FOR GENERAL PURPOSE, COLOUR AS REQUIRED (I REV) | IS : 151-1986 |
| 6 | QIS-131 | POWDER COATINGS- SPECIFICATIONS | IS : 13871-1993 |
| 7 | QIS-134 | PAINTS AND VARNISHES – CROSS-CUT TEST | ISO – 2409 |
| 8 | QIS-135 | STANDARD TEST METHODS OF ORGANIC COATING | ASTM D 522 – 93 A |
| 9 | QIS-25 | METHOD FOR BEND TEST (II REV) | IS : 1599-1985 |
| 10 | QIS-32 | SPECIFICATION FOR READY MIXED PAINT, AIR DRYING, RED OXIDE, ZINC CHROMATE, PRIMING (II REV) | IS : 2074-1992 |
| 11 | QIS-127 | STANDARD METHOD OF SALT SPRAY (FOG TESTING) | ANSI/ASTMB 117-73 IS 101 : 1988 |
| 12 | QIS-24 | SPECIFICATION FOR ELECTROPLATED COATINGS OF ZINC ON IRON AND STEEL (II REV) | IS : 1573-1986 |
| 13 | QIS-44 | SPECIFICATION FOR PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION | IS : 3618-1966 |
| 14 | QIS-57 | CODE FOR PRACTICE FOR PHOSPHATING OF IRON AND STEEL | IS : 6005-1970 |
| 15 | QIS-14 | SPECIFICATION FOR PVC INSULATED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS – (III REV) | IS : 694 -1990 |
| 16 | QIS-129 | METHOD OF TEST FOR CABLES – INSULATION RESISTANCE | IS : 10810 (43)-1984 |
| 17 | QIS-130 | METHOD OF TEST FOR CABLES – HIGH VOLTAGE TEST | IS : 10810 (45)-1984 |
| 18 | QIS-22 | SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES | IS : 1554-1988 |
| 19 | QIS-26 | SPECIFICATION FOR COPPER STRIP FOR ELECTRICAL PURPOSE (II REV) | IS : 1897-1983 |
| 20 | QIS-66 | SPECIFICATION FOR INTRCONNECTING BUS-BARS FOR AC VOLTAGE ABOVE 1 KV UPTO AND INCLUDING 36 KV | IS : 8084-1976 |
| 21 | QIS-17 | SPECIFICATION FOR DIRECT ACTING INDICATING ANALOG ELECTRICAL MEASURING INSTRUMENT AND THEIR ACCESSORIES | IS : 1248-1983 |
| 22 | QIS-27 | SPECIFICATION FOR VISUAL INDICATOR LAMPS (I REV) | IS : 1901-1978 |
| 23 | QIS-48 | SPECIFICATION FOR PUSH-BUTTON SWITCHES | IS : 4794-1968 |
| 24 | QIS-50 | SPECIFICATION FOR HOLDERS FOR INDICATOR LAMPS FOR ELECTRONIC AND TELECOMMUNICATION EQUIPMENT | IS : 4795-1968 |
| 25 | QIS-136 | METHOD OF HIGH VOLTAGE TESTING PART-II TEST PROCEDURES (I REV) | IS : 2071(2)-1974 |
| 26 | QIS-42 | SPECIFICATION FOR TOGGLE SWITCHES | IS : 3452-1966 |
| 27 | QIS-45 | ISO METRIC SCREW THREADS | IS : 4218-1976 |
| 28 | QIS-85 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS | ISO : 9000-2000 |
| 29 | QIS-33 | GENERAL TOLERANCES – TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS (III REV) | IS : 2102-1993 ISO : 2768-1989 |
| 30 | QIS-53 | METHODS FOR DETERMINATION OF SAMPLE SIZE TO ESTIMATE THE AVERAGE QUALITY OF A LOT OR PROCESS | IS : 5002-1969 |
| 31 | QIS-38 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR LOW- VOLTAGE SWITCHGEAR AND CONTROL GEAR | IS : 2147-1962 |
| 32 | QIS-100 | DEGREE OF PROTECTION OF ENCLOSED EQUIPMENT | IS : 13947-1983 |
