Standards Followed By Us

S.NO.QUALITY DEPT. NO.SPECIFICATIONSTANDARD NO.
1 QIS-12 SPECIFICATION FOR COLD ROLLED LOW CARBON STEEL SHEETS AND STRIPS (DWG. QUALITY) IS : 513-1986
2 QIS-15 SPECIFICATION FOR ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS & SECTIONS FOR GENERAL ENGINEERING PURPOSE. (III REV) IS : 733-1983
3 QIS-1 COLOURS FOR READY MIXED PAINTS AND ENAMELS (IV REV) IS : 5-1994
RAL Standard
BS 381 C/BS 4800
4 QIS-3 METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS IS : 101-1964
5 QIS-10 SPECIFICATION FOR READY MIXED PAINTS, SPRAYING, FINISHING, STOVING, ENAMEL, FOR GENERAL PURPOSE, COLOUR AS REQUIRED (I REV) IS : 151-1986
6 QIS-131 POWDER COATINGS- SPECIFICATIONS IS : 13871-1993
7 QIS-134 PAINTS AND VARNISHES - CROSS-CUT TEST ISO - 2409
8 QIS-135 STANDARD TEST METHODS OF ORGANIC COATING ASTM D 522 - 93 A
9 QIS-25 METHOD FOR BEND TEST (II REV) IS : 1599-1985
10 QIS-32 SPECIFICATION FOR READY MIXED PAINT, AIR DRYING, RED OXIDE, ZINC CHROMATE, PRIMING (II REV) IS : 2074-1992
11 QIS-127 STANDARD METHOD OF SALT SPRAY (FOG TESTING) ANSI/ASTMB 117-73
IS 101 : 1988
12 QIS-24 SPECIFICATION FOR ELECTROPLATED COATINGS OF ZINC ON IRON AND STEEL (II REV) IS : 1573-1986
13 QIS-44 SPECIFICATION FOR PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION IS : 3618-1966
14 QIS-57 CODE FOR PRACTICE FOR PHOSPHATING OF IRON AND STEEL IS : 6005-1970
15 QIS-14 SPECIFICATION FOR PVC INSULATED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS - (III REV) IS : 694 -1990
16 QIS-129 METHOD OF TEST FOR CABLES - INSULATION RESISTANCE IS : 10810 (43)-1984
17 QIS-130 METHOD OF TEST FOR CABLES - HIGH VOLTAGE TEST IS : 10810 (45)-1984
18 QIS-22 SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES IS : 1554-1988
19 QIS-26 SPECIFICATION FOR COPPER STRIP FOR ELECTRICAL PURPOSE (II REV) IS : 1897-1983
20 QIS-66 SPECIFICATION FOR INTRCONNECTING BUS-BARS FOR AC VOLTAGE ABOVE 1 KV UPTO AND INCLUDING 36 KV IS : 8084-1976
21 QIS-17 SPECIFICATION FOR DIRECT ACTING INDICATING ANALOG ELECTRICAL MEASURING INSTRUMENT AND THEIR ACCESSORIES IS : 1248-1983
22 QIS-27 SPECIFICATION FOR VISUAL INDICATOR LAMPS (I REV) IS : 1901-1978
23 QIS-48 SPECIFICATION FOR PUSH-BUTTON SWITCHES IS : 4794-1968
24 QIS-50 SPECIFICATION FOR HOLDERS FOR INDICATOR LAMPS FOR ELECTRONIC AND TELECOMMUNICATION EQUIPMENT IS : 4795-1968
25 QIS-136 METHOD OF HIGH VOLTAGE TESTING PART-II TEST PROCEDURES (I REV) IS : 2071(2)-1974
26 QIS-42 SPECIFICATION FOR TOGGLE SWITCHES IS : 3452-1966
27 QIS-45 ISO METRIC SCREW THREADS IS : 4218-1976
28 QIS-85 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS ISO : 9000-2000
29 QIS-33 GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS (III REV) IS : 2102-1993
ISO : 2768-1989
30 QIS-53 METHODS FOR DETERMINATION OF SAMPLE SIZE TO ESTIMATE THE AVERAGE QUALITY OF A LOT OR PROCESS IS : 5002-1969
31 QIS-38 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR LOW- VOLTAGE SWITCHGEAR AND CONTROL GEAR IS : 2147-1962
32 QIS-100 DEGREE OF PROTECTION OF ENCLOSED EQUIPMENT IS : 13947-1983